Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
17.09.2020 07:23

Testing Transformer Oil Moisture Content

Transformer oil testing is performed for both new products and for regenerated oil. Water content is a part of the testing is both cases.

Knowing the amount of water in the oil is indicative of its quality, and provides information on the causes of oil and solid insulation dielectric strength deterioration.

The highest allowed concentration of water in transformer oil depends on the type of equipment on average, no more than 10-20 ppm (grams per ton) is allowed. Detecting such a small amount of water is not simple, and the methods used for the testing must be highly precise and sensitive. Higher concentrations of water may cause transformer failure, so using a transformer oil dehydration machine is a mandatory measure.

Some of the most common methods of measuring the amount of water in the transformer oil are:


Автор: Статус: offline miapacky   Теги:  ransformer oil dehydration machine 

оценок: 0       Количество просмотров  просмотров: 19