Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
Сортировать            
04.08.2020 05:15

The Hot Air Stenter Must Be Kept Lubricated

    With the development of science and technology, the range of application of Hot Air Stenter in our lives is very wide. The range of printing of these Hot Air Stenters is very wide and the quality is better. However, maintenance is a very important aspect in the process of using these Hot Air Stenters. We cannot take the maintenance of Hot Air Stenter lightly.
     In the maintenance process, maintaining the lubrication status of the Hot Air Stenter is a very important aspect. Proper lubrication can greatly extend the life of the Hot Air Stenter. First, before using the Hot Air Stenter, you need to check whether the lubricant of the Hot Air Stenter is in a proper state. Generally speaking, there is a grease nipple on the Hot Air Stenter. If the oil standard shows that there is no oil, we need us Add lubricating oil in time. Because if there is insufficient lubricating oil, it is very easy to cause the machine to run difficult, and in the process of use,

...>>>



оценок: 0       Количество просмотров  просмотров: 19
29.07.2020 05:22

Introduction To The Use Of Hot Air Stenter

The screen has a very key function in the automatic roll-to-roll screen printing machine. To put it in a vivid way, if there is no screen, the automatic roll-to-roll screen printing machine will not be able to work normally.

The screen in the automatic roll-to-roll screen printing machine is a woven fabric for making a screen, a skeleton diagram for making a screen, a support point, a light-sensitive adhesive, and a conventional light-sensitive film. It is the basic of screen printing, open rotary screen printer is also called stencil printing equipment. The hole is produced by the opening of the screen, so there is no screen printing without the screen.


...>>>



оценок: 0       Количество просмотров  просмотров: 17
22.07.2020 05:53

Composition Of Open Rotary Screen Printer

There are three types of letterpress screen printing machines: flat press, round press and round press. Flat press letterpress printing machine is also called open rotary screen printer. It uses the common mechanism of screen printing and the application of mechanical transmission in printing machinery. The plate and embossing mechanism of the analytical version are flat. When working, the printing plate is in full contact with the embossing plate. The total pressure of the machine is compared at a time. Large, relatively long imprint time. This printing machine requires that the printing plate and the imprinted flat plate are flat, and the printing format is not large the circular flattened relief printing machine, also known as a flatbed printing machine, is equipped with a flat plate for the printing plate, and the stamping mechanism is a circular cylinder . When the machine is working, the printing plate reciprocates, and the printing speed is limited, so the output is not high. The

...>>>



оценок: 0       Количество просмотров  просмотров: 18