Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
Сортировать            
05.05.2019 07:51

How Many Optical Cable Connector Box Cleaning Methods Are There?

Reel-type Fiber Cleaners

The reel-type cleaner is designed for effective cleaning of almost all Optical Cable Connector Box with an accessible ferrule including LC, MU, SC, FC, ST, MPO/MTP, MTRJ and so on. If you only need to clean the accessible connector with a wide range of connector styles, it is an ideal choice for you.
CLE-BOX cassette cleaner is an essential non-alcohol cleaner to maintain and guarantee good quality of fiber optic connection. It supports removing dust, oil, and other debris for LC/SC/FC/ST/MU/D4/DIN connectors. Don't have to carry any other tools to clean the dust and grease on optical fiber interface. Cassette tapes are available for replacement after 500+ cleaning operations to ensure low cleaning cost. When using cassette cleaner, please always remember that don't reverse Cleaning direction

...>>>

Автор: Статус: offline otsedtalex   Теги:  optical cable connector box 


оценок: 0       Количество просмотров  просмотров: 5
27.04.2019 07:51

Xinghui Plastic Injection Parts Manufacturer Tells You About Injection Molding

COST:
Plastic Injection Parts molding is the most popular method to make plastic parts. If you need thousands of parts produced annually, plastic injection molding would be the most cost effective, even when factoring in the tooling. Of dollars, the actual piece price for the part may run as low as a few cents (if a very small part made of a common polymer). Even small parts produced via additive manufacturing will cost tens of dollars per part – price for thousands of Parts and you will quickly match the cost of plastic injection molding.

If you need a small plastic part made but only need a few of them - additive manufacturing is your better choice. When only a few parts are needed the cost for tooling in Plastic Injection Parts molding is prohibited. Additive manufacturing is the better choice for lower part Quantity.

...>>>

Автор: Статус: offline otsedtalex   Теги:  optical cable connector box 


оценок: 0       Количество просмотров  просмотров: 5
27.04.2019 07:50

Xinghui Plastic Injection Parts Manufacturer Tells You About Injection Molding

COST:
Plastic Injection Parts molding is the most popular method to make plastic parts. If you need thousands of parts produced annually, plastic injection molding would be the most cost effective, even when factoring in the tooling. Of dollars, the actual piece price for the part may run as low as a few cents (if a very small part made of a common polymer). Even small parts produced via additive manufacturing will cost tens of dollars per part – price for thousands of Parts and you will quickly match the cost of plastic injection molding.

If you need a small plastic part made but only need a few of them - additive manufacturing is your better choice. When only a few parts are needed the cost for tooling in Plastic Injection Parts molding is prohibited. Additive manufacturing is the better choice for lower part Quantity.

...>>>

Автор: Статус: offline otsedtalex   Теги:  optical cable connector box 


оценок: 0       Количество просмотров  просмотров: 5
27.04.2019 07:50

Xinghui Plastic Injection Parts Manufacturer Tells You About Injection Molding

COST:
Plastic Injection Parts molding is the most popular method to make plastic parts. If you need thousands of parts produced annually, plastic injection molding would be the most cost effective, even when factoring in the tooling. Of dollars, the actual piece price for the part may run as low as a few cents (if a very small part made of a common polymer). Even small parts produced via additive manufacturing will cost tens of dollars per part – price for thousands of Parts and you will quickly match the cost of plastic injection molding.

If you need a small plastic part made but only need a few of them - additive manufacturing is your better choice. When only a few parts are needed the cost for tooling in Plastic Injection Parts molding is prohibited. Additive manufacturing is the better choice for lower part Quantity.

...>>>

Автор: Статус: offline otsedtalex   Теги:  optical cable connector box 


оценок: 0       Количество просмотров  просмотров: 4
25.04.2019 07:51

Network Power From The Optical Cable Connector Box

Optical Cable Connector Box Cables – the thin strands made from molten silica glass. They process the information, convert it into light and transmit the data for you.
Through today’s blog, we will acquaint you with the multiple ways in which Fiber Optic Cables benefit you. So, let us plunge in:
Excellent Internet Connection
When we talk about internet connection, the first thing that comes to our mind is substantial amount of data exchange. During the initial days of advent of internet, you might have experienced low speeds and hours of anticipation while internet transmit the data. But after The advent of Fiber Optic Cables, the speed of data transmission reduced drastically. These network cables transmit data without hindrance and enable you to stream internet smoothly.

...>>>

Автор: Статус: offline otsedtalex   Теги:  optical cable connector box 


оценок: 0       Количество просмотров  просмотров: 8
15.04.2019 07:59

Optical Cable Connector Box Jumper Interface Type

 Fiber jumper interface type
Fiber jumper interface type: FC type fiber jumper
The external reinforcement method is a metal sleeve, and the fastening method is a turnbuckle. Generally used on the ODF side (the most used on the patch panel)
Fiber jumper interface type: SC type fiber jumper
The connector that connects the GBIC optical module has a rectangular shape and is fastened by a plug-and-pin type without rotating. (most used on router switches)
Fiber jumper interface type: ST type fiber jumper
Commonly used in fiber distribution frames, the outer casing is round and the fastening method is a turnbuckle. (For 10Base-F connections, the connector is usually ST type. Commonly used for fiber distribution

...>>>

Автор: Статус: offline otsedtalex   Теги:  optical cable connector box 


оценок: 0       Количество просмотров  просмотров: 6
10.04.2019 10:02

What Is The Difference Between The Optical Cable Connector Box And The Jumper?

In fiber optic cable installation, how cables are attached to the system is vital to the success of network. If done properly, optical signals would pass through the link with low attenuation and little return loss. Fiber optic pigtail offers an optimal way to joint optical Fiber, which is used in 99% of single-mode applications. This post contains some basic knowledge of fiber optic pigtail, including pigtail connector types, fiber pigtail classifications, and fiber pigtail splicing methods.
Fiber Pigtail Specification

Fiber optic pigtail is a fiber optic cable terminated with a factory-installed connector on one end, leaving the other end terminated. Hence the connector side can be linked to equipment and the other side melted with Optical Cable Connector Box. Fiber optic pigtail are utilized to High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber

...>>>

Автор: Статус: offline otsedtalex   Теги:  optical cable connector box 


оценок: 0       Количество просмотров  просмотров: 7