Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
Сортировать            
27.11.2018 10:02, Китай Смотреть на карте

What are the precautions for green cutting disc installation?

The green cutting disc  is a commonly used cutting piece for users, but for some users, in order to protect their personal safety, there are some things to be aware of:

1. Before installing the green cutting disc, the marking of the cutting piece must be checked first. The grinding wheel with unclear or no mark must be re-tested by the rotation, otherwise it is easy to be confused.

Second, we must understand the working line speed of the cutting piece. If the cutting piece with a working line speed of 50m/s is installed on a machine with a working line speed of 80m/s, it will easily break.

3. Before installation, use a wooden hammer to tap the cutting piece. If a crisp sound is produced, the cutting piece is of acceptable quality. Otherwise, there may be cracks in the grinding wheel. This

...>>>

Автор: Статус: offline yanghm   Теги:  green cutting disc 


оценок: 0       Количество просмотров  просмотров: 39
23.11.2018 09:58, Китай Смотреть на карте

What is the nature of green cutting disc?

We all know that abrasive tools are used for grinding, grinding and polishing. They are used in machining and polishing. They are also used in food processing, paper industry and ceramics, glass processing, etc. It is the raw material of the cutting piece, mainly because it is a single crystal texture hard, relatively sharp, suitable for cutting, then today, taking green cutting disc as an example, introduce the nature of the grinding tool.

Many fixed abrasives are generally classified into ordinary abrasive bonded abrasives and superabrasive bonded abrasives according to the abrasive used. The former uses ordinary abrasives such as corundum and silicon carbide, and the latter uses diamond and cubic boron nitride. Made of super-hard abrasive. In addition, there are some special varieties, such as sintered corundum abrasives. Ordinary abrasive-consolidated abrasives are abrasives that are bonded to a certain shape by a bonding agent

...>>>

Автор: Статус: offline yanghm   Теги:  green cutting disc 


оценок: 0       Количество просмотров  просмотров: 29
12.11.2018 09:08, Китай Смотреть на карте

What is the choice of green cutting disc?

The choice of the size of the green cutting disc has a great relationship with the material to be cut, and even has a great influence on the cutting of the material. What factors depend on the choice of the size of the green cutting disc?

The choice of particle size depends primarily on the surface roughness and grinding efficiency of the workpiece being ground. Today, the Aurora Abrasives manufacturer introduces the particle size.

Particle size refers to the particle size of the abrasive and its size is indicated by the particle size number. When grinding with coarse-grained grinding wheels, the production efficiency is high, but the surface of the ground workpiece is rough when grinding with a fine-grained grinding wheel, the surface roughness of the ground workpiece is better, and the productivity is lower. Under the premise of meeting the roughness requirements, coarse-grained grinding wheels should be used as much as

...>>>

Автор: Статус: offline yanghm   Теги:  green cutting disc 


оценок: 0       Количество просмотров  просмотров: 44