Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
Подписаться
18 августа 2020 г. 04:59

How To Dry Cupric Oxide Powder

Cupric Oxide Powder drying is the process of removing moisture from various materials. Various materials can be solid, liquid or gas. The solid can be divided into bulk materials, fiber materials, granular materials, fine powder materials, etc. Generally it is the moisture in the material, but it can also be other solvents. Moisture is the object here.

There are three types of drying methods:

(1) Mechanical dehydration method

The mechanical dehydration method is to squeeze out part of the water by pressing the material. Commonly used methods include pressing, sedimentation, filtration, and centrifugal separation. The mechanical dehydration method can only remove part of the free moisture in the material, and the combined moisture remains in the material. Therefore, the moisture content of the material after the mechanical dehydration is still high, generally 40-60%. But mechanical dehydration is the most economical method.

(2) Heating and drying method

This is what we often call drying, which uses heat energy to heat the material and vaporize the moisture in the material. A certain amount of heat energy is consumed to remove the moisture in the material. Air is usually used to dry the material. The air is heated in advance and sent to the dryer to transfer heat to the material, vaporize the moisture in the material to form water vapor, and bring it out of the dryer with the air. After the material is heated and dried, the combined moisture in the material can be removed to reach the required moisture content of the product or raw material.

(3) Chemical dehumidification method

It uses hygroscopic agent to remove a small amount of moisture in gas, liquid and solid materials. Due to the limited dehumidification capacity of hygroscopic agent, it is only used to remove trace moisture in materials. Therefore, there are few applications in production.

 

In the actual production process, for high-humidity materials, as far as possible, the mechanical dehydration method of drying equipment is generally used to remove a large amount of free moisture, and then other drying methods are used for drying.

 оценок 0

Автор: Статус: offline weishida
просмотров: 24
Ключевые слова: 
Поделиться в:   icon   icon   icon   icon   icon    


Чтобы добавить комментарий Вы должны зарегистрироваться или войти если уже зарегистрированы.

(Вы можете отправить комментарий нажатием комбинации клавиш Ctrl+Enter)