Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
14 августа 2020 г. 06:35

Our Barrel Mold Production

We are a professional mold manufacturer, which mainly produces various Pail Moulds. For example, plastic barrel molds are one of our products.
Explanation of the key points of barrel mould technology.
A. Explanation about the uneven thickness of the barrel wall caused by the eccentricity of the barrel mold core and the eccentricity of the barrel.
1. If the cooling of different areas of the barrel-shaped mold core and cavity is not equal, this will cause the following differences in the molten material. The larger the flow in the hot zone, the smaller the flow in the cold zone. The thickness of the barrel wall in the hot zone will become thicker. The temperature difference usually causes at least 0.05mm...
2. Generally, the interlocking height of the barrel mold should be 20% to 30% of the height of the plastic barrel, for example, the smaller barrel should be 20%, and the larger barrel mold should be about 30% of the height.
3. The processing process refers to which processing method should be selected and the matters that should be paid attention to when processing the barrel mold core and cavity.
In addition, we also provide other types of products, such as Plastic Bucket Moulds. If you are interested in our products, please consult and contact us.

 оценок 0

Автор: Статус: offline rixiangmosu
просмотров: 26
Поделиться в:   icon   icon   icon   icon   icon    

Чтобы добавить комментарий Вы должны зарегистрироваться или войти если уже зарегистрированы.

(Вы можете отправить комментарий нажатием комбинации клавиш Ctrl+Enter)