Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
Подписаться
Адрес статей http://www.zamnoy.com/blogs/rixiangmosu
Личные статьи | в сообществах | все статьи
1 | 2       
05.06.2020 06:27

From 5L, 10L, 20L... square, round, oval and other Plastic Pail Mould.For plastic pail mould technology, it has no frame, it means complete core and complete cavity.There are many plastic pail mould for these non-intuitive procedures, but they all boil down to the same thing.For plastic pail mould cavity,the cooling system design near the hot runner tip area is very important, this area is very sensitivity.In order to increase cooling performance, there also have water channels in the centre.

Capacity from 0.5L,1L,1.5L, 2L, 3L, 4L, 5L, 7L, 10L, 12L, 15L, 18L Pail Mould as customers’ need.How to avoid the 18L pail mould core eccentric, which caused the 18L pail mould wall thickness not even?So at the beginning,when we design 18L pail mould,we should consider these factores.Before mold making, we will have products analysis, to confirm the assembly and sealing.And it’s glad that customers trust our experience, expertise and the on-site service.That is when it is time for troubleshooting.

...>>>

  Теги:  18l pail mould 


оценок: 0       Количество просмотров  просмотров: 1
29.05.2020 06:26

We adopt single loop cooling way and setup even distribution water channels as much as possible.Although the criteria and the technology used to produce paint bucket Mold have changed dramatically in recent years.Bucket Mould is an apparatus for the generation of plastic items.And we will keep offering good quality bucket moulds and service to all of our clients!

Our wholesale bucket mould are mainly exported to Europe.And greatly reducing the production cost.The whole infusion is carried out.We attach great importance to analyze mold structure, including demolding draft angle.We have built long term relationship with our customers.We increase the mold steel hardness through heat treatment.

And a reasonable thickness can guarantee quality while saving costs.Paint bucket moulds which we made are known for being long lasting and easy maintenance.Lastly the shape is shut the following infusion.

...>>>

  Теги:  paint bucket mould 


оценок: 0       Количество просмотров  просмотров: 5
29.05.2020 06:04

About mold design, the main structure are similar, what make the difference is the detail, such as the cooling system design, ejection system design.For paint pail mould technology, it has no frame, it means complete core and complete cavity.Paint pail moulds are wildly use in daily life, Paint Pail Mould are in large demand.Paint pail mould is an important part of plastic packaging bucket mold. Paint pail mould need to be sealed and packaged accurately.

While we design an octagon step to have a better alignment and lock for the core and cavity.The thickest point of the paint pail mould takes the longest to go from a molten state to.If anything we can do for you please do not hesitate to contact us.Even though 20L pail mould structure is not complex,but if want to make a quality 20L pail mould,it is not a easy job.

20L Pail Mould may be operated in less than ideal conditions.Unique mold construction to ensure container

...>>>

  Теги:  20l pail mould 


оценок: 0       Количество просмотров  просмотров: 4
19.05.2020 06:23

After the Paint Pail Mould finish,we can provide you the test report and video of the trial, and send the sample for you confirm.If the budget is not accurate enough, there will be problems in the cooperation between the lid and the paint pail mould.Even though paint pail mould structure is not complex,but if want to make a quality paint pail mould,it is not a easy job.

Thus it will slow down injection molding speed,cause sink mark.The paint pail mould has recycled water to flow in every part of it which reduces the cooling time, improves the production efficiency and greatly reduces products costs.So at the beginning,when we design 20L pail mould,we should consider these factores.

Nowadays, efficiency is required by markets. And it’s glad that customers trust our experience, expertise and the on-site service.In our daily life,lots of 20L pail mould are made by plastic injection

...>>>

  Теги:  20l pail mould 


оценок: 0       Количество просмотров  просмотров: 4
12.05.2020 06:19

There is a reasonable price to pay for a Paint Pail Mould. If your budget is too low the chances are that you will be rebuilding or repairing the thin wall paint pail mould within a fairly short period.In our daily life,lots of household utensils are made by injection molding,such as paint pail mould,paint bucketsetc.

Besides,other reasons,like non-proper paint pail mould design or bad polish work on the core and cavity. Paint pail mould decentraction,paint pail mould wall thickness uneven factores are the usual problems.We can say if the first time you are making 20L pail mould,you will face many troubles.

20L pail mould were designed and made. All materials are made to allow for a quick supply chain turnaround.Make two parts of 20L pail mould, reducing much noise during manufacturing compared to original one steel block of core.With our large collection of 20L Pail Mould and exterior sealers, fillers,

...>>>

  Теги:  20l pail mould 


оценок: 0       Количество просмотров  просмотров: 6
06.05.2020 06:27

The Plastic Pail Mould is that the failure rate of kits is very low.Not only does this apply to the difference between the instructions for kits and fresh grapes, but it also applies to instructions between different manufacturers kits.Forward a few years and things got a bit more precise.There are many plastic pail mould for these non-intuitive procedures, but they all boil down to the same thing.

Plastic pail mould is suitable in plastic pail mould, Injection oil bucket mould.If you are used to one kind of kit, that does not mean you can apply its typical instructions to anotherWe make China plastic pail mould, thin wall container mould and plastic pail mould with 0.5L,1L,3L,5L,10L,18L pail mould.

These are essential for checking temperatures and specific gravity readings under normal circumstances.

...>>>



оценок: 0       Количество просмотров  просмотров: 3
26.04.2020 06:27

Besides,other reasons,like non-proper plastic pail mould design or bad polish work on the core and cavity.Cooling system is also main course for Plastic Pail Mould. We need to design as much cooling lines as possible and proper layout.For plastic pail mould cavity,the cooling system design near the hot runner tip area is very important, this area is very sensitivity.Plastic pail moulds are prepared for manufacturing of suitable plastic pail mould.

Plastic pail mould is suitable in plastic pail mould, Injection oil bucket mould, Icecream bucket mould, 18L pail mould.We are insisting in hexagon mold shoulder to ensure mold thickness uniform,equipped with wear plates which sharply increase mold stability.Bad cooling system will directly influence the bucket's cycle time and out looking.

A high-quality mold structure is a premise for a qualified mold before manufacturing.So at the beginning,when

...>>>

  Теги:  18l pail mould 


оценок: 0       Количество просмотров  просмотров: 10
20.04.2020 06:25

While we design an octagon step to have a better alignment and lock for the core and cavity,also which change would prelong the Plastic Pail Mould life.The mold has recycled water to flow in every part of it which reduces the cooling time, improves the production efficiency and greatly reduces products costs.Because as we know, during the edge of the plastic pail mould, there is a undercut, so, we should let the undercut out before fall.

When we think about the plastic pail mould, especially the plastic pail mould, the first thing we will worry about the thickness of the bucket, is it same or not.We are famous sealing plastic pail mould supplier, we design the pail with accurate dimensions and know where is mostly important for sealing water.In order to increase cooling performance, there also have water channels in the centre.

...>>>

  Теги:  18l pail mould 


оценок: 0       Количество просмотров  просмотров: 10
13.04.2020 06:09

Our pail made by our pail mould: Water-proof, full-closed, semi-closed, tamper evident, stackable, easy to handle, strong and durable.We can make various kinds of pail mould as per customer's requirements.A big capacity pail production line contained high speed molding machine, pail mould, side enter robot.

Every Pail Mould machining process will be weekly informed. Mould trial video and report will be sent.Mould makers for different kinds of pail mould, more than years of experience in pail mould making.The plastic bucket mould includes a core movable along a molding axis, a stripper ring movable a limited distance along one set of guide rods.

Quality is the life of our company we focus on quality and time control.The quotation can be made on drawing or samples provided by the customer, our plastic bucket mould are both excellent in quality

...>>>

  Теги:  plastic bucket mould 


оценок: 0       Количество просмотров  просмотров: 3
03.04.2020 06:13

You can talk to our customer service center about your sourcing requirements.That you will be rebuilding or repairing the pail mould within a fairly short period.After all, price is what you pay for a Pail Mould.The delivery time should be calculated from the date you approved our mould drawing.

The wall thickness is even or not there is a reason causing wall thickness uneven is working on the parting line by hand.We have on offer a large range of new and quality used pail mould for products such as plastic bucket mould.

Our Plastic Bucket Mould uses circulating water to flow in every part of the mould, reducing the cooling time during injection molding.Plastic bucket mould is suitable in Plastic Paint pail mould, Injection oil bucket mould, Icecream bucket mould, Medical bucket mould.

  Теги:  plastic bucket mould 


оценок: 0       Количество просмотров  просмотров: 11
1 | 2