Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе

Тегов нет

Новые возможности

6 июля 2021 г. 12:19

What are tungsten carbide blades

tungsten carbide circle blades

The tungsten carbide blades and tips which are made of cemented carbide as the raw materials through fine finishing can be used as an industry blade, with excellent performance including high hardness, wear resistance, toughness and good corrosion resistance.

Advantages Of Tungsten Carbide Blades

1. The hardness is extremely high, up to Moh's hardness of 8.9-9.1, which is 10 times higher than the hardness of 18K gold. The high hardness makes carbide blades have good wear resistance, not easy to appear scratches and deformation.

2.It has high brightness like a mirror, with highly polished, fully glow in the color and light like the gemstone.

3.The corrosion resistance of tungsten carbide blades is good. It does not change color, no rust, and the luster can be maintained for a long time, which are the other metals don’t have.

What Should Be Paid Attention To Using Tungsten Carbide Blades

The characteristics of the carbide material determine the importance of the safe operation of cutting carbide blades.

1. Blade installation

Before the installation, please clear the dust, chips and other debris on the bearing mounting surface in advance, keep the bearing mounting surface and the tipper clean.

a.To carefully put the blade on the mounting surface of the bearing, rotate the tip machine shaft to automatically find the insertion of the blade center.

b. Install the crimping block on the tipper blade.

c. Load the hexagonal bolt, fasten the screws in the hex wrench to securely mount the blade on the bearing.

d.After the blade is installed, ensure no loose and no deflection.

2. Safety protection

After the blade is installed, the protective device must be equipped before starting the predicted machine and acts as a real protective effect.

3. Working speed

The working speed of the tipper is limited to below 4500 rpm/minute. It is strictly forbidden to exceed the limit speed.

4. Test machine

After the blade is installed, it is necessary to operate for 5 minutes and carefully observe the operation of the argument and cutting machine. It is absolutely not allowed to have obvious loose, vibrations and other abnormal sounds.

5.Push the circuit board uniformly

In the cutting process, please push the circuit board that needs to be cut at a uniform speed, avoiding being too rapidly to push the circuit board. When the circuit board has severely collided with the blade, it will cause blade damage.

6.Blade storage method

It is strictly forbidden to write on the blade with an electricity pen or other scratches to prevent damage to the blade body. The blade of the cutter is extremely sharp, but it is very crisp, In order to avoid accidental damage, ensuring the blade does not touch the human body or other metal hard objects.

 оценок 0

Автор: Статус: offline pinkledstone
просмотров: 10
Поделиться в:   icon   icon   icon   icon   icon    

Чтобы добавить комментарий Вы должны зарегистрироваться или войти если уже зарегистрированы.

(Вы можете отправить комментарий нажатием комбинации клавиш Ctrl+Enter)