Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
Теги

Тегов нет

Новые возможности

Подписаться
30 июня 2021 г. 13:37

Why Select Solventless Adhesive

Solventless adhesive adopts a solvent-free adhesive composite film to reduce energy consumption and comprehensive production costs, improving productivity and quality.

solvent-free adhesive

The solvent-free adhesive is a viscous material and two separate materials are connected together by means of its viscosity, a viscous liquid shape at normal temperatures, such as an epoxy resin. It is one of the most important auxiliary materials. Due to the solvent-free, it is beneficial to protecting the environment and cleaning products, is extremely widely applied in the flexible packaging industry.

Solvent-free adhesives are commonly used in solventless composite processes, which is of great significance for promoting and adopting solvent-free composite technology. It can solve the problems of different composite structural materials in a flexible packaging company. Frequent cleaning mixers and solventless machine can save time, improving production efficiency, and more importantly, saving the labor force of cleaning equipment, and further reducing the solvent quantity of cleaning equipment, more beneficial to reduce VOCs.

solventless adhesive

Analysis Of The Problems During Using Solventless Adhesive

1. Flying gel phenomenon

In solventless composite equipment, the gluing unit will find flocculation around the exhaust port, which is caused by fly ash when the solvent-free adhesive is used. The solventless adhesive has high viscosity. During high-speed production, the adhesive is sucked into the air and adheres to the surface of the device during exhaust. By increasing the exhaust volume, the adhesion of the fly ash on the device surface can be reduced, and the frequency of the cleaning vents can be increased to maintain the stable exhaust volume.

2.Influence on the friction coefficient of the slip agent

The use of a solventless adhesive can affect the friction coefficient of the inner layer containing the slip agent, the thinner the inner layer, the more obvious effect, the higher the curing temperature, the longer the time, the more significant effects of the curing process and the inner layer formulation. It is effective to properly reduce the amount of adhesive or choosing the adhesive which little effect on the slide agent.

3. Solubility

During solventless compounding, the adhesive sometimes dissolves the ink. It is necessary to verify the work before mass production, stabilization process and avoid free replacement of ink and solventless binders. Further, by adjusting the solventless composite process, the solvent-free complex is first cured for 2 hours at room temperature and then curing in the curing chamber to alleviate the problem of ink dissolution.

4. Adhesive cannot be completely cured or dried

The main agent and curing agent of two-component solvent-free adhesive are mixed in a certain proportion. If the mixing is uneven, an intermittent problem occurs. If the ratio is wrong, the glue does not dry. It is very sticky. In order to prevent unevenness mixing, in addition to controlling the instability of manual rubber, using the glue mixer, it is also necessary to regularly inspect the equipment status.

5. Bubble Failed

 

Bubble problems are also commonly occurred in solventless compounding. The so-called bubble means that the two films are not fully adhered, and there is a gas between the composite film and the substrate. When composite the aluminum foil, a small white point is generated. As long as the two layers are not completely adhered and the transparency is different, there will be bubble phenomena.

 

Insufficient glue will increase the bubbles caused by uneven coating, which can be solved by applying an appropriate amount of glue. The bubbles caused by high ambient humidity, are CO2 which is formed by the NCO in the binder and the water in the air. The problem will be solved by appropriate control of the humidity in the composite environment and keep the relative humidity is 70% or less. If the curing is not suitable, the secondary flowing of the adhesive can also cause bubbles, which can be solved by appropriately increasing the curing temperature.

The application of a solventless adhesive has unique advantages of high efficiency, environmental friendly and low cost. It will gradually substitute dry composite applied in the solventless composite.

 оценок 0

Автор: Статус: offline pinkledstone
просмотров: 17
Поделиться в:   icon   icon   icon   icon   icon    


Чтобы добавить комментарий Вы должны зарегистрироваться или войти если уже зарегистрированы.

(Вы можете отправить комментарий нажатием комбинации клавиш Ctrl+Enter)