Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
Теги

Тегов нет

Новые возможности

Подписаться
27 апреля 2021 г. 09:54

Useful Knowledge Shared For Tungsten Carbide Wire Drawing Dies

tungsten carbide wire drawing dies

Carbide wire drawing dies adopt high-quality tungsten carbide as the core, which has high hardness, good thermal conductivity and low friction coefficient. Tungsten carbide wire drawing dies are simple to produce with corrosion-resistant, impact-resistant, and low cost which is the outstanding feature of this product. It is suitable for the drawing of ferrous metals, large-size wires, and occasions with poor wire drawing conditions.

The Brands And Applications Of Tungsten Carbide Wire Drawing Dies

Wire drawing is the manufacturing process for reducing or changing the cross-section of the metal wire by using a series of stretched plates or molds. Carbide wire drawing die is a kind of tungsten carbide dies with wide applications in various fields.

Brands: YG6X

Applications

Suitable for the production of carbide dies with drawing inner holes which are smaller than ¢ 6.00mm.

Brands: YG6

Applications

Used for the non-ferrous metal round bar which has drawing inner holes that are smaller than ¢ 20mm and the drawing dies which has inner holes that are smaller than ¢ 10mm.

Brands: YG8, YG10

Applied for drawing steel and the production of non-ferrous metal round bars & pipes.

Brands: YG15

Used for the drawing of steel rod and pipe which have a high shrinkage.

grade list of carbide wire drawing dies

The Precautions And Maintenance Of Tungsten Carbide Wire Drawing Dies

1. Ensure the stability of the drawing machine

Each drawing drum, over-line guides should be smooth, flexible, strictly controlled for beating tolerance. If the drum is found, the guide wheel has a worn trench and the drawing dies should be repaired in time.

2.Good lubrication

Good lubrication is important to ensure the surface quality of the wire and extend the service life of the mold. The lubrication index should be checked frequently, removing the copper powder, impurities in the lubricant, so that the equipment hole can not be polluted. If the lubrication doesn’t work, it must be replaced in time and clean it.

3. Reasonable allotype

Reasonable allotype is to ensure the surface quality of the wire and control size accuracy, reducing the wear of wire drawing drum and equipment operating load. For sliding wire drawing machines, it is necessary to familiarize with the mechanical elongation of the equipment. The sliding coefficient is reasonably selected, which is the primary step of fitting mold.

4. Appropriate adjustment of the size for the compression angle

The surface reduction rate of each drawing and the material of the drawn wire are also closely correlated with the compression angle of the respective mold. The size of the compression angle is appropriately adjusted according to the size of the surface reduction rate.

5.The timely replacement of the aging drawing dies

When the drawing die reaches the service life, please replace it in time for repairing treatment to avoid excessive causing scrap the wire.

For more professional knowledge, please visit the article page of high quality tungsten carbide wire drawing dies.

 оценок 0

Автор: Статус: offline pinkledstone
просмотров: 14
Поделиться в:   icon   icon   icon   icon   icon    


Чтобы добавить комментарий Вы должны зарегистрироваться или войти если уже зарегистрированы.

(Вы можете отправить комментарий нажатием комбинации клавиш Ctrl+Enter)