Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
Подписаться
10 февраля 2021 г. 14:28

What does Careddi Supercritical CO2 Extraction System encompass

What's Supercritical CO2 Fluid Removal Machine (What is supercritical co2 extraction? )

 Supercritical Fluid Extraction (SFE) is a type of extraction method technology using supercritical fluid because solvent to separate the valuable ingredients from the raw biomass material. For example to draw out essential oils from all kinds of plants, like CBD petrol, ginger oil, nutmeg oil, black coffee oil, vanilla petrol, seabuckthorn seeds oil, frankincense acrylic, nicotine etc. The most favored supercritical fluid is carbon dioxide (CO2) as CO2 will be clean, innocuous and easily to acquire, especially the CO2 substance has the characteristic with super solubility for fat-soluble components at supercritical state. Moreover, the solubility of formula of different polarities, numerous density, and different molecular weights will change whenever we set different parameters of pressure, temperature and circulation rate. Therefore, we can optimize the best process conditions to split the valuable ingredients by adjusting the temperature, difficulty and flow rate.

 

 

What does Careddi Supercritical CO2 Extraction System encompass

 Careddi Supercritical CO2 Extraction System (Careddi SCFE) is well designed for effective oil extraction along with easily operation. It may be a completely configured system is made of extraction vessels (extractors), spliting up vessels (separators), Operation entrance panel, High pressure CARBON Pump, Chilling system, warming up system, Pressure regulator control device, Co-solvent pump, CO2 Storeroom tank, CO2 Recovery knock out etc. The users can run the slicer to produce essential oils only need to provide with energy and CO2. Please consider following flow diagram in the whole system of Careddi CARBON DIOXIDE IS HOT Extraction machine.

 

img1

 

 

Working principle and procedure for SCFE Extraction and Spliting up

 (How does co2 removal work? )

 

The CO2 gets into liquid when this temperature is between 5-8℃ plus the pressure is above 4. 5Mpa. The chiller system can maintain CO2 circulation system while in the temperature range of 5-8℃. The CO2 questionable pump can pump the CO2 liquid on the extractors and increase the pressure to ruthless range of 35Mpa(the maximum pressure could be customized), and the pressure is often adjusted by back force regulator valve. The heating system provide a suitable temperature for you to extractors and separators, plus the temperature can be realigned automatically.

The extraction and separation process is a following steps.

1. Start out running the chiller along with heating system. (temperatures will meet the set points)

 TWO. Loading raw biomass material in the cylinder of extractor.

3. Start running the CO2 underhand pump, pumping CO2 into the extractor to increase the pressure to the optimized parameter. (Most regarding materials extraction pressure can be between 15-35Mpa).

4. Following the pressure meet the collection point, open valve and allow CO2 fluid circulated within the whole system. The CO2 fluid will enter into the extractor from the end, come out from top rated through raw biomass fabric. The valuable ingredients are going to be dissolved into the CO2 when CO2 experience, and come out along with CO2. The extraction happened.

5. The mixture of CARBON DIOXIDE and valuable ingredients which appear from extractor will enter the separators. The valuable ingredients might be separated with CO2 in separators with the separator has lower strain, the valuable ingredients shall be stored inside the separator and will be collected after THIRTY min extraction time.

SOME. Normally the extraction time is just about 90 min if the particular oil rate is less than 20%, extraction time is going to be longer if the fabric oil rate is increased.

 

 

Applications of Careddi Supercritical CO2 Extraction machine (essential gas extractor)

 Careddi CO2 Extraction machine popular as plant oil extractor for several kinds of plants.

Supercritical CARBON DIOXIDE extraction for hemp oil/cannabis oil/CBD oil/THC oil, hemp crude oil.

Supercritical CO2 extraction for black coffees oil

 Supercritical CO2 extraction for de-caffeine

 Supercritical CARBON DIOXIDE IS HOT extraction for frankincense acrylic

 Supercritical CO2 extraction to get tobacco leaves oil, might be of assistance

 Supercritical CO2 extraction for many seeds like grape signs oil, seabuckthorn seeds oil, tea tree seeds oil.

Supercritical CO2 extraction for lots of herbs like citronella fat, angelica oil, orange peel off oil, lemon grass acrylic, evening primrose oil, rosemary essential oil etc.

Supercritical CO2 extraction for many spices like ginger oil, cinnamon oil, nutmeg oil, clove oil, turmeric petrol, vanilla oil, chili colour oil, black pepper essential oil, mint oil etc.

https://www.careddisupercritical.com/products/hemp-oil-extraction-machine.html

201911ld

 оценок 0

Автор: Статус: offline ovenmarker123
просмотров: 11
Поделиться в:   icon   icon   icon   icon   icon    


Чтобы добавить комментарий Вы должны зарегистрироваться или войти если уже зарегистрированы.

(Вы можете отправить комментарий нажатием комбинации клавиш Ctrl+Enter)