Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
Подписаться
18 декабря 2020 г. 06:36

Laser cutting technology has significantly relocated the needle for quick proces

Laser cutting technology has significantly relocated the needle for quick processing of flat linen metal. But what with regards to cutting tube and pipe? Today’s laser tube cutting machines are specifically designed to cut a great range of mill-length tube and pipe, whether circular, square, rectangular, or triangular. Most of the more advanced options might process I- and H-beams, C-channel, perspective iron, and other user-defined figures.
Cutting tube and pipe employing a laser is similar in a handful of ways to processing ripped sheet metal. A massive amount tube is made on the same material as the flat metal is done from, as it starts out flat before it's formed into the conduit. However, there are some significant differences between each. With tube cutting, the operator needs to be familiar with the other side in the tube and the effect the laser could have on it while processing the cut, particularly the way it relates to thermal expansion.
When cutting flat material, a laser will place off sparks, debris, along with slugs, which generally land around the table or into a chip bucket. But by using laser tube cutting, all those sparks, debris, and slugs often fall on the inside of the tubing. That may be an issue for a good number of fabricators, which is why they need to understand this and learn how to deal with it effectively. It’s always important to always remember how to properly cope with scrap material, dross, along with slugs.
There are a nice selection of significant differences between laser reducing tube versus flat bed sheets. Operators need to be aware that cutting tube requires an ideal finished cut so the equipment can move on to the next part. With laser lowering sheet metal, the machine is not affected by the previous part and can simply move on to the next sheet regardless of the caliber of cut. It is important the fact that last cut of the part be of your quality to allow the finished part that they are separated from the unprocessed materials stick. If the finished part will not separate it can present a challenge for the unloading process and may also present a challenge for the start of the next part if the prior part does not separate properly on the raw material.

One of the easiest things operators can do to make sure that the machine is efficiently cutting tube is always to visually inspect the cut to be sure it has been carried out properly. With end slashes, the last cut with the part will determine if the part can be separated from your raw material stick, that makes it necessary to ensure very good cut quality. If a final cut of the finished part won't allow for the broken relationships, the machine cannot still the next part.
https://www.ekslaser.com/products/metal+tube+laser+cutting+machine.html 201911ld

 оценок 0

Автор: Статус: offline ovenmarker123
просмотров: 8
Поделиться в:   icon   icon   icon   icon   icon    


Чтобы добавить комментарий Вы должны зарегистрироваться или войти если уже зарегистрированы.

(Вы можете отправить комментарий нажатием комбинации клавиш Ctrl+Enter)