Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
Подписаться
Адрес статей http://www.zamnoy.com/blogs/otsedtalex
Личные статьи | в сообществах | все статьи
1 | 2 | 3 | 4 | 5       
31.05.2019 06:58

The lift industry famously takes health and safety very seriously, which explains why lifts are the unheralded but undoubtably safest form of mechanical transportation. Best practice and the key to perfecting lift maintenance are planned regular servicing to maintain safety standards, prolong the life of China Passenger Elevator and Reduce downtime.
Keep Up with Regulations
Lift rules and regulations are continually evolving to improve the lift industry and its maintaining practices. The strict but effective guidelines allow facilities managers to maintain safe lift systems across the UK, adhering to not only current protocol, but also new and developing standards. The pieces of legislation, EN 81–20 and 81–50, that will become effective in September 2017, will drastically increase elevator safety for passengers and service personnel. Lifts installed after this time

...>>>

  Теги:  china passenger elevator 


оценок: 0       Количество просмотров  просмотров: 15
30.05.2019 07:47

XingHui Bakelite Parts supplier to bring you to know Bakelite:
Bakelite's chemical name is phenolic plastic, which is the first plastic to be put into industrial production. Phenolic resins can be obtained by polycondensation of phenols and aldehydes under the action of an acidic or basic catalyst. Phenolic resin and sawn wood powder, talcum powder (filler), urotropine (curing agent), stearic acid (lubricant), pigment, etc. are thoroughly mixed and heated and kneaded in a mixer to obtain bakelite powder. The thermoelectric phenolic plastic product is obtained by heating and pressing the bakelite powder in a mold.
Bakelite has high mechanical strength, good insulation, heat resistance and corrosion resistance, so it is often used in the manufacture of electrical materials, such as switches, lamp holders, earphones, telephone casings, instrument cases, etc. name.

...>>>

  Теги:  bakelite parts 


оценок: 0       Количество просмотров  просмотров: 18
29.05.2019 06:58
We can see the glass lifts in shopping malls, office buildings, scenic spots, villas, etc. So what are the characteristics of glass lifts?
Glass lifts, glass lifts manufacturers, panoramic glass lift
1 Security
Glass lifts come with an emergency release device that automatically layer when power outage.
2 Feature

When customers choose a sightseeing Elevator Lift, they definitely need to know the function of this elevator. glass lifts are energy efficient and environmentally friendly. With their own steel plate or glass shaft, customers can customize the functions they need.
3 Beautiful

...>>>

  Теги:  elevator lift 


оценок: 0       Количество просмотров  просмотров: 17
28.05.2019 06:30

First let's begin with the basics. Sheet metal is one of the strongest materials that can be readily shaped and cut. Because of its strength, it is an ideal candidate for making Sheet Metal Parts that require good load-bearing ability. Also, many metals have good Corrosion resistance, as well as good electrical conductivity. This makes metal a good candidate for electrical components.
Sheet metal is recyclable, so it can be reused indefinitely. Items made from sheet metal can be aesthetically pleasing, which makes the material a great candidate for products that require both good visual appearance and strength.
Sheet Metal Basics
Sheet and coil material is produced by progressively squeezing a red-hot, large, rectangular block of metal between rollers —much like an old-fashioned clothes ringer on a washing machine. This metal-squeezing

...>>>

  Теги:  sheet metal parts 


оценок: 0       Количество просмотров  просмотров: 5
27.05.2019 09:40

The professional Screw Elevator team Otse answers your questions about the screw elevator:
The specific cost of a screw elevator can be considered from the following aspects:
1, equipment costs, the quality of home elevators is not the same, divided into high, medium and low three grades, different grades, the price is also different. Household appliances with different grades have many differences in drive system, material, process, The current economical home elevator needs to be around 130,000 yuan, while the slightly more comfortable one is about 180,000 yuan, and the high-end one is more than 200,000 yuan. Can choose the right one for their own economic strength.
2, civil construction fees, civil construction costs of home elevators, mainly including the cost of the construction of the hoistway and the excavation of the pit, the amount of this cost, and the type

...>>>

  Теги:  screw elevator 


оценок: 0       Количество просмотров  просмотров: 13
24.05.2019 05:37
The main advantage of hydraulic systems is they can easily multiply the relatively weak force of the pump to generate the stronger force needed to lift the elevator car (see How Hydraulic Machines Work to find out how).
The main problem is the size of the equipment. In order for the elevator car to be able to reach higher floors, you have to make the piston longer. The cylinder has to be a little bit longer Than the piston, of course, since the piston needs to be able to collapse all the way when the car is at the bottom floor. In short, more stories means a longer cylinder.
The problem is that the entire cylinder structure must be buried below the bottom elevator stop. This means you have to dig deeper as you build higher. This is an expensive project with buildings over a few stories tall. To install a hydraulic elevator in a 10 -story building, for example, you would need

...>>>

  Теги:  china home elevators 


оценок: 0       Количество просмотров  просмотров: 5
23.05.2019 05:56

Have a good look at this great idea made out of stainless steel Sheet Metal Parts.stainless steel, U-Channel, Custom cut sheet metalstainless steel, U-Channel, Custom cut sheet metal
Basically the finished metal product you see here is a rectangle, where we did cut a big hole during the laser cutting process out of the rectangle.
The customer also wanted us to bend that rectangle into a “U-shape ”, which we also offer in our easy 4 step ordering process to end up with this final shape.
Mounted to a wall of a fitness center this idea made out of stainless steel is a real great idea and shows you what can be done out of metal.
The U-shaped stainless steel metal is holding disinfection fluid available so athletes can clean the used equipment prior to the next one who wants to use it.

...>>>

  Теги:  sheet metal parts 


оценок: 0       Количество просмотров  просмотров: 13
22.05.2019 07:06
This is the question which might have crossed your mind at some or the other moment in time. Well, nothing wrong with it as elevators are a serious piece of machinery which requires its fair share of respect and adulation.

In order to understand how the elevators or lifts actually work, we must first understand how many types of elevators are there actually. Well broadly and commonly speaking an Elevator Lift is classified on the basis of propulsion system or the powering mechanism used for its operation.
There are four types of the mechanism used for powering an elevator or a lift and this also forms the basis of their nomenclature:
Traction Elevators:
The use of worm gears for mechanical control, basically, they control the elevator movement by using a

...>>>

  Теги:  elevator lift 


оценок: 0       Количество просмотров  просмотров: 5
22.05.2019 07:06
This is the question which might have crossed your mind at some or the other moment in time. Well, nothing wrong with it as elevators are a serious piece of machinery which requires its fair share of respect and adulation.

In order to understand how the elevators or lifts actually work, we must first understand how many types of elevators are there actually. Well broadly and commonly speaking an Elevator Lift is classified on the basis of propulsion system or the powering mechanism used for its operation.
There are four types of the mechanism used for powering an elevator or a lift and this also forms the basis of their nomenclature:
Traction Elevators:
The use of worm gears for mechanical control, basically, they control the elevator movement by using a

...>>>

  Теги:  elevator lift 


оценок: 0       Количество просмотров  просмотров: 5
21.05.2019 07:10

Stamping Parts have the characteristics of stable size, high precision, light weight, high rigidity, good interchangeability, high efficiency and low consumption, simple operation, and easy automation. Therefore, stamping technology has been widely used in the automotive industry. In recent years, with the development and maturity of servo technology, the servo press production line with servo technology as the core has become more and more widely used in automobile manufacturers.
As one of the four major processes of automobile manufacturing, the stamping process directly affects the quality, cost and production cycle of the whole vehicle. When pressing, an external force is applied to the sheet by the press and the mold to cause plastic deformation and separation, thereby obtaining a part processing method of a desired shape and size. At present, the stamping equipment used by each main engine factory is basically a fully automatic stamping production line. The stamping production

...>>>

  Теги:  stamping parts 


оценок: 0       Количество просмотров  просмотров: 4
1 | 2 | 3 | 4 | 5       

скрытых интим статей  3