Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
Подписаться
13 января  2020 г. 09:50

How to Fix 0xc000014c BSOD on Windows?

Error Code 0xc000014c is troubling the users a lot nowadays, and hence we have prepared a workaround to resolve it. There are several reasons behind this error, such as Software problems, firmware, driver, and hardware issues. Below we have written all the absurd information about this error, including its causes and fix. Make sure that you read this workaround carefully to get the best results.

Using Windows 10 Installation Media

If you would like to use Windows 10 installation media, then abide by the given steps.

  • Go to the Windows 10 installation media and attach it to your system.
  • Then restart the system.
  • You should hold any button within the installation media.
  • Navigate to currency, language, keyboard/input, and time process and click on the Next option.
  • Thereafter, click on the Repair your computer (NOT Install Windows) and choose the type of Operating System you would like to repair.
  • You have to click on the Troubleshoot option.
  • After that, choose the Advanced option and click on the Startup Repair or Automatic Repair.
  • If the computer identifies the Operating System, choose the version which is recently using on the device.
  • Now, delete DVD bootable media or detach the USB and attempt to boot the computer up.

Run Particular Commands and Use Command Prompt

If you wish to run particular commands and use Command Prompt, then pursue the given instructions.

  • Go to the Power key and attempt to start the system.
  • You should hold the F8 button constantly at the start and choose the Repair your computer option.
  • Navigate to Command Prompt and form of the pursuing commands (hit the Enter key after everyone:
    • bootrec /fixMBR
    • bootrec /fixBoot
    • bootrec /rebuildB

Using an External Device

If you would like to use an external device, then abide by the given steps.

  • Take a DVD device or USB drive and insert it into the system.
  • When you are come up to with a message claiming ‘Press any key to boot from DVD or USB, press any key o the keyboard.
  • Then, go to the Install Windows screen should come.
  • Here choose ‘Repair your computer.’
  • Now, the Windows recovery environment will be turned on.
  • Here, select for ‘Choose an option’ then pick the Troubleshoot option.

Run an SFC Scan

If you wish to run an SFC scan, then pursue the given instructions.

  • Go to the Windows installation media and link your device with it to the system.
  • Then, if a window comes, select ‘Repair your computer.’
  • You should select the Troubleshoot option and choose Advanced.
  • Thereafter click on the Command Prompt service.
  • You have to enter ‘sfc /scannow’ once the cursor blink and press the Enter button.
  • Now, you should wait to complete the command and restart the system.

Confirm the Disk for Probable Corruption

If you would like to confirm the disk for probable corruption, then abide by the given steps.

  • Link the device which contains the ‘Windows installation media.’
  • Go to the option which says ‘Repair your computer.’
  • Then, choose the Troubleshoot option and select the Advanced option.
  • You should select to perform a Command Prompt service.
  • Enter ‘chkdsk C:/f/x/r’ once the cursor blink.
  • Thereafter, press the Enter button and wait to perform the command.
  • Now, reboot the system.

Restore the BSD Files

If you wish to restore the BSD files, then pursue the given instructions.

  • Navigate to the system and connect the bootable ‘Windows 10 external drive into it.
  • You have to wait for a welcome page to come and go for Next and Repair your computer.
  • After that, choose the Troubleshoot option and proceed with the Advanced options.
  • Thereafter, select the Command Prompt and enter these commands one after the other: bootrec /FixMbr, bootrec/FixBoot, bootrec /ScanOS, bootrec /RebuildBcd.
  • Press the Enter key after every command and wait to complete the process.
  • Now, restart the Windows system.

Source url:- https://williamsblogpoint.wordpress.com/2020/01/13/how-to-fix-0xc000014c-bsod-on-windows/

Ava Williams is a Norton product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as norton.com/setup.

 оценок 0

Автор: Статус: offline marierobert8168
просмотров: 8
Поделиться в:   icon   icon   icon   icon   icon    


Чтобы добавить комментарий Вы должны зарегистрироваться или войти если уже зарегистрированы.

Если у Вас уже есть OpenID, LiveJournal или Blogger аккаунт, Вы можете добавить комментарий просто указав Ваш OpenID или имя пользователя LiveJournal или Blogger.
OpenID:  OpenID LiveJournal Blogger         Войти  
(Вы можете отправить комментарий нажатием комбинации клавиш Ctrl+Enter)