Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
Подписаться
12 октября 2020 г. 04:35

Introduction To Stenter Cleaning

    Flat Screen Printer is a machine that prints text and images, and is mainly used to produce printed matter. The screen plate is an important part of the screen printing machine, and it is necessary to maintain a high degree of cleanliness to avoid contamination of the product. Today this article mainly explains the cleaning method of the screen plate.

 


    To clean the screen of the screen printing machine, first use thinner, bleach or builder to rinse the residual ink or other materials of the screen after screen printing, and then gently wipe the surface of the screen with a clean mesh. However, everyone should pay attention to the different printing scenes of screen printing machines, and the principles and methods of cleaning will also vary. The second common method is to wash with water, which is a low-cost and quick method.
 
    When cleaning the screen of Stenter, cover the printing table with paper or plastic cloth. Put the flat printing plate in the washing tank and gently scrub. Note that you should not wash it immediately to avoid affecting the tension of the screen and the phenomenon of loose screen. . If you need to use a cleaning agent to clean, you need to evenly apply the cleaning agent on both sides of the screen plate, then use a sponge to wipe, and then rinse with clean water to ensure that no bubbles are left.

 оценок 0

Автор: Статус: offline lichengprintingmachine
просмотров: 6
Ключевые слова: 
Поделиться в:   icon   icon   icon   icon   icon    


Чтобы добавить комментарий Вы должны зарегистрироваться или войти если уже зарегистрированы.

(Вы можете отправить комментарий нажатием комбинации клавиш Ctrl+Enter)