Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
Личные статьи | в сообществах | все статьи
1 | 2 | 3       
09.08.2019 11:55
The whole bit of guide belt of Flat Screen Printing Machine is driven by three roll whole bit principle, control roll of swing angle is dragged by electric motor ,motor of backward and forward running or stop is by two photoelectric switches which only close to the edge of guide belt , under right installation and good paring-off this institutions can guarantee guide with smooth run, partial range can control within ± 3mm.

Magnetic Chuck:

Professional magnetic provides a uniform printing penetration, magnetic chuck of Flat Screen Printer is electromagnetic type coil which designed by the latest CAD-CAM system, uniform penetration of printing paste for high-precision mechanism without left, middle right color difference, without maintenance.

Net Head Chuck:


оценок: 0       Количество просмотров  просмотров: 4
27.06.2019 05:21
The Hot Air Stenter Machine is always used for stretching and tensioning the fabric by heating and stretching the two sides with uniform width.

The continuous flat dyeing and finishing of knitted fabrics can optimize printing quality, and reduce damage to the fabric with excellent flexibility. In addition, it can reduce the cost of the mercerizing machine.

The hot air stenter is mainly used to make the weaving machine. Generally, the hot air stenter uses the heat transfer oil to heat the air in the setting machine, and then heats the fabric. When the fabric reaches a certain temperature and remains for a certain period of time, the structure of the fabric changes to achieve the purpose of setting. The double-point lining coater is the main equipment for processing high-grade low-elastic linings and thin non-woven linings. It mainly consists of several parts such as retort, slurry coating, dust coating, up and down suction, drying room, cooling and


  Теги:  hot air stenter  hotairstenter 

оценок: 0       Количество просмотров  просмотров: 4
18.06.2019 11:23
With the dyeing and finishing of textiles, the warp direction is subjected to a large pulling force, resulting in elongation and narrowing of the length. In order to overcome this unstable state and ensure the dimensional stability of the textile, the speed of feeding into the cloth is adjusted during stentering or setting, which is super-feeding. The speed of feeding into the cloth is higher than the speed of the Hot Air Stenter machine called positive super-feeding (or over-feeding, shrink-code). The positive overfeeding causes the warp yarn to retract, the weft density rises, the gram weight increases and the warp direction shrinks.

If the speed of the cloth is less than the speed of the Hot Air Stenter setting machine, it is called anti-overfeed (or negative overfeed, pull code). The anti-overfeeding causes the warp yarn to elongate, the weft density decreases, the gram weight decreases, and the warp direction shrinks. There are many dyeing factories in China that are willing to make


  Теги:  hot air stenter  hotairstenter 

оценок: 0       Количество просмотров  просмотров: 10
15.06.2019 10:30
In the textile industry, we often use a stenter. Do you know what the purpose of using the device is? The Hot Air Stenter is mainly composed of several main devices, each of which has a different function. Let's take a look.

First, let's summarize what the main structure of the hot air stenter machine is. The main devices are: cloth feeding device, rolling device, hot air circulation system, cooling device, weft feeder device, drying room, and super feed device, door width adjusting device and dehumidifying device. Among them, the cloth feeding device is used for feeding and discharging cloth, and the rolling device is mainly for padding the fabric.

In addition, the hot air circulation system of the hot air stenter machine plays a major role in improving the heat utilization efficiency and production efficiency of the equipment. The cooling device cools the finished product while reducing the crease of the cloth. As for the super-feeding device,


оценок: 0       Количество просмотров  просмотров: 7
13.06.2019 11:29
As a piece of equipment in the textile printing and dyeing factory, Hot Air Stenter Machine is used for stretching and tensioning the fabric by heating and stretching.

The heat setting of the fabric is usually a process in which the fabric is kept at a certain size and heated under a certain temperature and humidity for a certain period of time and then cooled. Therefore, the main process conditions for heat setting are nothing more than temperature, time, tension, etc.

First, the temperature

Temperature is an important factor. Since the fabric is heat-set, the degree of wrinkles that have been eliminated, the improvement of surface flatness, the thermal stability of the fabric and other performances are closely related to the heat setting temperature.

Second, the time


оценок: 0       Количество просмотров  просмотров: 6
10.06.2019 11:04
The Flat Screen Printing Machine transports the towel by the rubber conveyor belt (referred to as the guide belt). The multiple flat nets overprint the different colors on the towel. The accuracy of the printing and color registration directly affects the appearance and quality level of the finished towel, so the system is required to position accurately in order to improve production efficiency and reduce costs, it is necessary to maintain a certain printing speed. If the speed is too fast, the inertia is too large, the guide belt is difficult to stop, and the positioning color is inevitably inaccurate, which is an unavoidable contradiction. Flat Screen Printing Machine can be divided into net moving Flat Screen Printing Machine and cloth Flat Screen Printer Machine

1. Net moving Flat Screen Printing Machine

The net moving flat screen printing machine is to stick the fabric on the fixed printing platen, and


оценок: 0       Количество просмотров  просмотров: 8
01.06.2019 04:33
Requirements for the glue of Open Type Rotary Screen Printing Machine

Since 80% of the defects in the printing process are caused by the printing paste, there are strict requirements on the quality of the glue, mainly including:

The glue must be prepared before opening the machine .

The color of the glue must match the original. The glue should maintain a proper consistency. Generally, the thinner the fabric, the greater the consistency of the glue, the finer the pattern, and the consistency of the glue. The printing paste should be fully dissolved. After the preparation is completed, the nylon mesh should be used for filtration to avoid impurities blocking the net or damage the rotary screen.

Requirements for rotary screen printing machine


оценок: 0       Количество просмотров  просмотров: 14
30.05.2019 11:26
When two or more patterns of registrations are printed, all or part of the patterns on the printed fabric are staggered or overlapped, which is seriously inconsistent with the original, called inaccurate registration.

(1)Constant Inaccurate Registration

Constant Inaccurate Registration means that the registration is not inaccurate from the start of driving, and the corresponding pattern always shifts from the original position or overlaps. The low impact factors of such problems can be found in the following reasons: the accuracy of the printing machine, the rotary screen and its plate making, the process, the operation, the printed fabric, and the patch pulp.

(2)Inaccurate Left and right Registration

That is to say, the registration is accurate in the middle, but inaccurate on the right or left.


оценок: 0       Количество просмотров  просмотров: 10
27.05.2019 09:44
As is known to us, Flat Screen Printing Machine has evolved from the traditional printing technology, completely replacing and changing the ancient printing method. Today, the screen printing machine is very versatile and involves many industries. Completely integrated into our lives.

Products printed on screen printers can be found everywhere around our lives, such as automotive glass, home appliance glass, and home appliance trademarks. As long as it is a flat screen printing, it can be done with a screen printing machine, and the application industry is very extensive. Of course, there are many ways to achieve it, but I am sure that the use of screen printing machines is the most cost-effective, whether it is traditional industries or emerging industries.

If you don't know very well, you can use the following example to quickly understand the use of screen printing machines. If I have a company that specializes in manufacturing and producing home appliance


оценок: 0       Количество просмотров  просмотров: 15
25.05.2019 05:06
Flat Screen Printing Machine work (composed of 5 major elements) : screen printing plate, scraper scraper, ink, screen printing Taiwan and substrates. Flat screen printing machine can be manual flat screen printing machine, semi-automatic flat screen printing machine and fully automatic flat screen printing machine. In this article , we introduce full automatic flat screen printing machine for you:

Flat screen printing is one of the most popular printing systems in textile printing industry. In Flat Screen Printing Technology the screen is flat and moves up and down. The printed fabric moves forward step by step and passes through a dryer. Manual flat screen printing machine and printing process is too much slower and production rate in flat screen printing is also lower. The best solution for reducing time of printing and increase the productivity in printing is to use the fully automatic flat screen printing machine. In this article I will try to give features of fully automatic flat


оценок: 0       Количество просмотров  просмотров: 3
1 | 2 | 3