Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
Подписаться
Личные статьи | в сообществах | все статьи
16.09.2020 08:39

The structure of the automatic Corn Thresher:

Corn Thresher is mainly composed of rollers, concave plates, screens, fans, feeding hoppers, seed slides, spiral guide rods, etc. It adopts an axial flow threshing device that feeds the cob at the end of the shaft tangentially. The process flow: the ears of corn enter the drum through the feeding hopper and are threshed under the impact of the high-speed rotating drum and the interaction of the ears of corn, the drum and the concave plate. Most of the removed grains and small impurities pass through the holes of the concave plate, and are cleaned by the fan. Light mixed materials are blown out from the discharge port, and the grains slide out of the machine by the grain slide. The cob moves backward along the axis of the drum, and is discharged out of the machine through the surface of the vibrating screen from the outlet of the shaft end. Part of the grains entrained in the cob leaks through

...>>>

  Теги:  corn thresher  seed planter 


оценок: 0       Количество просмотров  просмотров: 11
09.09.2020 04:52

At present, there are still many problems in the research and application of China's Seed Planter that need to be resolved: agricultural machinery research is out of touch with China's agricultural production needs, and cannot meet the real needs of domestic agricultural production there is no relevant research system of its own, and a large number of plagiarism and imitating foreign advanced machinery Type, unable to adapt to domestic production The currently used models have unstable transplanting quality, poor versatility, low automation, and high machine cost. Looking at the development process and application status of Seed Planter at home and abroad, combined with domestic Seed Planter development The existing problems can be summarized in the development direction and research focus of China's Seed Planter.


...>>>

  Теги:  corn sheller  seed planter 


оценок: 0       Количество просмотров  просмотров: 10
02.09.2020 05:04

1. Seed Planter saves labor, labor, and has high mechanized production efficiency. Seed Planter adopts precision seeding, one-time seedling formation, and a series of operations from substrate mixing, tray loading to seeding and covering are realized automatically. Miaoling is 10-20 days shorter than conventional seedlings, which improves labor efficiency, reduces labor intensity and reduces workload.

2. Seed Planter can save energy, seeds and nursery space. Seed Planter is a direct seeding of dry seeds, one hole, one seed and concentrated seedlings. The number of seedlings per unit area is higher than that of conventional seedlings. Using Seed Planter can effectively increase the protection production area.

3. Seed Planter has low cost. After using the plug, the overall cost can be reduced by 30%~50%.

...>>>

  Теги:  corn sheller  seed planter 


оценок: 0       Количество просмотров  просмотров: 16
26.08.2020 09:14

     In addition to following certain operating guidelines, the correct use of Corn Sheller must also keep in mind the misunderstandings of not entering into use. The following are four major misunderstandings used by Corn Sheller for reference.
1. Poor repair
    After Corn Sheller is used up, it should be checked and repaired immediately, and kept in a safe place, so that it can be used again next time or in the coming year. But after some are used up, they are randomly placed on the sidelines, grounds, yards, exposed to wind, sun, rain, and many parts are rusted, causing self-damage or difficulty in maintenance before next use. Even some knowing that there is something wrong, they do not overhaul or dispatch, thinking that it will take a short time anyway, and they will just reluctantly. Therefore, accidents such as loosening of screws, broken bars,

...>>>

  Теги:  corn sheller  seed planter 


оценок: 0       Количество просмотров  просмотров: 11
19.08.2020 05:14

Cotton is an important economic crop in our country. Statistics show that my country is the largest cotton producer and consumer. my country's cotton area accounts for 3% of the planting industry, with an output value of 10%. In 2012, my country's cotton textile exports reached 262.5 billion US dollars. The three main technologies of cotton planting are high density, drip irrigation and mechanized harvesting, which places higher demands on Corn Thresher. So how can I buy a Corn Thresher that meets the requirements?

The row spacing configuration adopted by this Corn Thresher is mostly 20+40+20cm, with two walking rows of 60cm, combined rows of 60 (or 50) cm, and a total width of 4.2. , The average line spacing is 35cm. The width of the mulch film used is 115cm, the coverage rate of the mulch film is: 300/430=69 8%, and the lighting area ratio after sowing and covering soil is 180/300=60%. In this Corn Thresher,

...>>>

  Теги:  corn thresher  seed planter 


оценок: 0       Количество просмотров  просмотров: 13
11.08.2020 05:58

        Knapsack Fertilizer Machine makes people say goodbye to the era of manual harvesting of seeds. It not only improves production efficiency, but also harvests more clean seeds. Although everyone knows how Knapsack Fertilizer Machine works, do you know how it operates? Let me tell you below.
The Knapsack Fertilizer Machine is fixed on the rear suspension of the tractor via a suspension frame. The gearbox is connected to the output shaft of the tractor via the power input shaft on it. The machine is turned on, the loosening shovel is inserted into the soil, and the roots of the seeds are shoveled out of the soil. , The rhizome and the soil block enter the vibrating screen, and the soil block that wraps the seed rhizome is vibrated, and a part of the soil block is shaken off. The vibrated soil block and the seed rhizome enter the front conveyor belt, and then a part of the soil block is missed before transmission. The belt uses horizontal leak-proof rods and vertical pull rods to send

...>>>



оценок: 0       Количество просмотров  просмотров: 23
04.08.2020 05:28

One is to conduct a safety inspection. Level the four feet of the Corn Thresher to ensure that the equipment is stable and firm, and reduce shock. At the same time, according to the imitation order, check whether the rolling and swing parts are flexible and free of collision, check whether the adjustment mechanism is normal and whether the safety measures are complete and effective to ensure that the machine There is no debris inside, and at the same time all lubrication parts should be filled with sufficient lubricating oil.

The second is to carry out a trial run. After turning on the power, let it idle for 1-2 minutes, check whether the machine is running normally, check for jams, collisions and other abnormal phenomena, and then feed in after everything is normal.

The third is to accurately choose the workplace. Choose a flat and open place for the thresher homework,

...>>>

  Теги:  corn thresher  seed planter 


оценок: 0       Количество просмотров  просмотров: 22
29.07.2020 05:28

In the production and processing, the motor of the corn processing machine is decelerated by the pulley to drive the rotation of the main shaft of the thresher, and multiple inclined blades are welded on the main shaft. When the Corn Thresher is running, the corn will be attracted by the blades of the main shaft, move forward, and move up and down. During the movement, through sliding with the grids on both sides and bottom, the purpose of threshing is achieved. The use of this corn processing machine for threshing work has the following characteristics.

1. Using this corn processing machine for corn threshing work can reduce the crushing rate of corn particles to open, effectively ensuring the processing quality of the corn processing machine.

...>>>

  Теги:  corn thresher  seed planter 


оценок: 0       Количество просмотров  просмотров: 25
22.07.2020 05:47

1. The Seed Planter should be level and stable.

If the machine is not placed smoothly, it will increase the vibration amplitude of the machine, which will affect the threshing effect of the corn thresher. Secondly, it will loosen the parts of the corn thresher and naturally affect the threshing effect.

2. The water content of threshing corn should not be too large.

Anyone who has used a corn thresher knows that if the corn moisture is too high, the corn is too flexible and strong, and the threshing effect is not good, and if the corn moisture is too high, it will increase the burden on the machine. Generally, try to keep the corn kernels in the mouth to bite It's better if there are no obvious bite marks.

3. Frequently overhaul and maintain the machine.

...>>>

  Теги:  corn sheller  seed planter 


оценок: 0       Количество просмотров  просмотров: 30