Автоподбор страны, региона, города
Введите начальные буквы названия и через секунду-две выберите вариант из появившегося списка
Если такого названия в списке нет - напишите нам

Подробнее об автоподборе
Подписаться
7 декабря 2018 г. 04:29, г. Авадхара, Грузия Смотреть на карте

Fiber Optic Splice Closure Selection Of Mounting Materials

 

Green Telecom is a company specializing in the production of communication equipment, including Fiber Optic Splice Closure, Fiber Closure, Inline Closure , etc.

Cable connector box installation requirements:

1. All kinds of socket panels should have a logo. The color, graphics, pen and ink performance of the terminal equipment business examples.

2. The fiber adjacent to the device and the adapter bottom box of the fiber optic cable in the area should have sufficient space and should meet the planning requirements.

3. The location of the suspect module, the multi-user cable terminal box, the connection point wiring module, the installation pattern and the height should meet the requirements of the plan.

4. When the installation is in the local board or in the air, the flow should be discussed in the box, the suspect panel accepts the erection and degree, the junction box cover can be opened, and should have waterproof, dustproof and anti-pressure effects, the junction box cover The surface should be flush with the air.

5. When the cable connector box bottom box is installed with the suspect module and the power socket at the same time, the spacing and the receiving protective facilities should meet the plan requirements.

6. The flow essentials of the cable joint box base should be determined according to the detailed premise of on-site construction. It can be installed by shrinking screws, nails, etc. The flow requirements of the bottom box of the doubt module are determined by the premise of the construction site.

7. Install the cable connector box on the wall, and its position should be more than 300 mm in the air. When the local board is being accepted in the air in the room. The cable terminal box should be 300 mm outside the local board.

8. The flow screw needs to be tightened, and no loose signs should occur. The installation of the base, the suspect module and the panel should be firm and stable, and there should be no signs of looseness. The panel should be connected to a certain extent, so that the panel is neat and tidy.

Cable connector box selection of materials

The cable connector box is a part of the tension structure in which the optical cable communication line is short. The primary function is to achieve the continuation of the fiber optic cable, and to continue the grounding effect of the fiber optic cable, the internal grounding assembly and the grounding part of the optical cable should be in electrical communication, and the metal component of the optical cable connector box and the grounding assembly and the optical cable reinforcing core are included. Do each other to avoid the impact of the situation on the cable discussion box.

Because the operation of the cable connector box is based on the outside, their use is mostly buried, displaced or piped. Therefore, high requirements are placed on the planning and application of the flow and grounding assembly of the cable continuous box.

The service life of the cable connector box is not indirectly dependent on the quality of the material. The fair and reliable material is the basic tube that is subject to high voltage DC breakdown. The layout and the quality of the material and the external state are also affected by the voltage strength performance of the cable connector box. In order to improve the voltage-resistance function of the cable to continue the box, it is necessary to use a better material to increase the brightness of the outside, and to reduce the curvature between the edge and the pole and between the pole and the ground. In environments where other parameters are being communicated, such environments can add at least 100% of the length.

Click here for more information on Fiber Optic Splice Closure .

 оценок 0

просмотров: 3
Ключевые слова: 
Поделиться в:   icon   icon   icon   icon   icon    


Чтобы добавить комментарий Вы должны зарегистрироваться или войти если уже зарегистрированы.

Если у Вас уже есть OpenID, LiveJournal или Blogger аккаунт, Вы можете добавить комментарий просто указав Ваш OpenID или имя пользователя LiveJournal или Blogger.
OpenID:  OpenID LiveJournal Blogger         Войти  
(Вы можете отправить комментарий нажатием комбинации клавиш Ctrl+Enter)